Terug naar blog
Handleidingen 2026-11-20 Texas Precision Optics Inc 0 weergaven

Gun Gravity Case Cleaning Kit: Paint Spray Gun Care

Gun Gravity Case Cleaning Kit: Paint Spray Gun Care

Learn how to use the 17-piece cleaning kit to thoroughly clean your spray gun or airbrush, with tips on brush selection and maintenance.

Why a Dedicated Cleaning Kit Matters for Your Spray Gun

Paint spray guns and airbrushes work with fine nozzles, tiny passages, and delicate seals. Leftover paint, primer, or clear coat hardens inside these parts and causes spitting, uneven spray patterns, or a complete blockage. A general rag-and-solvent approach rarely reaches the internal channels where residue builds up.

The Gun Gravity Case 17PCS Air Spray Gun Cleaning Kit is built for this job. It includes a set of flexible wire brushes designed to reach the cracks and crevices that trap dirt and grime. Using the right brush for each part saves time and reduces the risk of damaging the gun's internal surfaces.

What the 17-Piece Kit Includes

  • Gun Gravity Case 17PCS Air Spray Gun Cleaning Kit Brush Paint Spray: This 17 Piece Spray Paint Gun Cleaning Kit comes with everything you require to give your spray gun or air brush a thorough, deep clean. The kit provides a complete set of tools, so you don't need to buy brushes separately. The 'everything you require' claim means you can start cleaning immediately after unboxing.
    Gun Gravity Case 17PCS Air Spray Gun Cleaning Kit Brush Paint Spray
    Gun Gravity Case 17PCS Air Spray Gun Cleaning Kit Brush Paint Spray
  • Gun Gravity Case 17PCS Air Spray Gun Cleaning Kit Brush Paint Spray: Made from fine flexi wire, these brushes will get into all the cracks and crevices that store dirt, grime and contaminants. Flexible wire brushes can navigate the bends and narrow passages inside a spray gun's fluid passages, air cap, and nozzle, which rigid brushes or cloths cannot reach.

How to Clean Your Spray Gun with the Kit

The following steps are based on the kit's design. Always consult your spray gun's manual for any specific disassembly or solvent recommendations.

  1. Disassemble the spray gun: Remove the nozzle, air cap, fluid tip, and any other removable parts. Place small parts in a clean container so they are not lost.
  2. Select the correct brush size: The kit contains 17 brushes of varying diameters. Choose a brush that fits snugly into the passage you are cleaning without forcing it. A brush that is too large may get stuck or damage the bore.
  3. Clean each passage: Dip the brush in an appropriate cleaning solvent. Gently push and pull the brush through the fluid passage, air cap holes, and nozzle orifice. The flexible wire lets the brush follow the internal shape of the part.
  4. Rinse and inspect: After brushing, rinse the parts with clean solvent and blow them dry with compressed air if available. Hold each part up to a light to confirm no residue remains inside.
  5. Reassemble and test: Once all parts are dry, reassemble the spray gun and run a test spray with clean solvent or water to confirm proper function before loading paint.

Care and Storage of the Brushes

After each use, rinse the brushes with solvent and wipe them dry. Store the kit in its original case or a dry container to prevent the wire from rusting or bending out of shape. A well-maintained brush set lasts through many cleaning sessions and keeps your spray gun performing reliably.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel