Retour au blog
Guides pratiques 2026-11-21 Texas Precision Optics Inc 0 vues

MT 4x20 Carry Handle Scope BDC Turret Setup Guide

MT 4x20 Carry Handle Scope BDC Turret Setup Guide

Learn how to set up the MT 4x20 Carry Handle Scope with BDC turret and Mil-Dot reticle for AR-15 and M-16 rifles.

What the MT 4x20 Carry Handle Scope Offers

The MT 4x20 Electro Sight Carry Handle Scope is a fixed 4x magnification optic with a 20mm objective lens, designed specifically for M-16 and AR-15 style rifles. It features a built-in bullet drop compensation (BDC) turret calibrated in 100-yard increments out to 500 yards, and a Mil-Dot reticle for holdover and windage estimation. This scope is waterproof, fogproof, and shockproof, making it suitable for field use. Note that the carry handle is sold separately and must be installed first.

Key Specifications

Mounting the Scope on a Carry Handle

The MT 4x20 Electro Sight includes an integrated base that slides into the inside track of a rifle's carry handle. At the base of the mount is a peep sight that allows you to still use the rifle's iron sights. Follow these steps:

  1. 1. Install the carry handle: If your AR-15 or M-16 does not have a carry handle, purchase one separately and attach it to the upper receiver per the handle's instructions.
  2. 2. Slide the scope onto the carry handle track: Align the integrated base of the scope with the dovetail slot inside the carry handle. Slide it forward or backward to achieve proper eye relief (2.7 inches from your eye).
  3. 3. Tighten the retaining screws: Use the provided screws or a hex key to secure the scope firmly. Do not overtighten; ensure it is snug and does not shift under recoil.
  4. 4. Verify the peep sight alignment: The peep sight at the base of the mount should align with the front sight post. Adjust the scope position slightly if needed to maintain iron sight usability.

Setting Up the BDC Turret

The BDC turret is factory-calibrated for a specific cartridge and barrel length, but you should confirm your rifle's trajectory. Start by zeroing the scope at 100 yards using the standard elevation and windage adjustments. Once zeroed, the BDC markings on the turret can be used for quick holds at longer distances. If your ammunition's trajectory differs, note the actual impact points and adjust your hold accordingly. The turret is not user-adjustable for different calibers, so treat the markings as a baseline.

Using the Mil-Dot Reticle

The Mil-Dot reticle provides aiming points for windage and elevation without turning turrets. Each dot spacing corresponds to 1 milliradian (mil). Use the dots to hold over for distance or lead for moving targets. For example, if your bullet drops at 400 yards, hold over approximately 5 mils. Practice at known distances to confirm your holds.

Zeroing the Scope

After mounting, you will need to zero the scope for your rifle. The process is standard for a fixed-power scope.

  1. 1. Bore sight (optional): If you have a boresighter, use it to get on paper before live fire.
  2. 2. Fire a 3-shot group at 50 or 100 yards: Use a stable rest. Note where the group lands relative to the point of aim.
  3. 3. Adjust windage and elevation: Turn the turret caps (if present) to move the point of impact. Each click typically adjusts 1/2 or 1 MOA; check your scope's markings.
  4. 4. Confirm at 100 yards: Fire another group to verify zero. Adjust as needed until the point of aim matches point of impact.

Final Checks

Once zeroed and the BDC turret is set, test the scope at various distances to confirm the drop compensation markings. The MT 4x20 Electro Sight is a straightforward, fixed-power option for AR-style rifles that simplifies aiming with its integrated carry handle mount and BDC system.

Articles connexes

Customer Service
Accueil
Produits
Panier
Profil