العودة إلى المدونة
نصائح والعناية 2026-11-15 Texas Precision Optics Inc 9 مشاهدة

Laser Boresighter Batteries: TPO .350 Legend Care Tips

Laser Boresighter Batteries: TPO .350 Legend Care Tips

Keep your TPO .350 Legend red laser boresighter ready for the range with practical battery care, storage habits, and troubleshooting checks.

Why battery care matters for a .350 Legend boresighter

A red laser boresighter only helps if it turns on reliably when you need it. The TPO .350 Legend unit ships with two sets of batteries—six cells total—so you have a spare set ready. That spare set is useful only if you store it properly and replace cells before they fail mid-session.

This guide covers simple battery-care habits for the TPO boresighter, plus storage and troubleshooting checks you can do at home. It does not cover live-fire sighting procedures or internal disassembly, because the supplied information does not include those steps.

What the TPO .350 Legend boresighter includes

A simple battery-care routine

These steps are general good practice for small battery-powered optics. They do not replace any manufacturer instructions that may come with your unit.

  1. Keep the spare set sealed and dry: Store the unused set of batteries in its original packaging, away from moisture and extreme heat. This helps prevent corrosion and self-discharge before you need them.
  2. Remove batteries when storing the boresighter: If the unit will sit unused for weeks, take the cells out. This reduces the chance of leakage that could damage the contacts.
  3. Inspect contacts before installing cells: Look for dirt, corrosion, or debris on the battery contacts. A clean contact ensures reliable power transfer.
  4. Match the spare set to the original: Use the second set of six batteries included with the TPO unit as your direct replacement. Do not mix old and new cells in the same set.
  5. Test the laser briefly before a range trip: Turn the unit on for a few seconds to confirm it produces a bright red dot. If it looks dim, replace the batteries with the spare set.

Storage habits that protect the boresighter

  • Keep it in a padded case: The TPO boresighter has sturdy aluminum construction, but storing it loose in a range bag can still scratch or dent it. A small padded pouch protects the finish and the battery compartment.
  • Avoid hot vehicles: High heat can shorten battery life and stress electronic components. Bring the unit indoors after shooting rather than leaving it in a car.
  • Store batteries separately from the unit: If you remove the cells, keep them in a small plastic bag or original blister pack so they do not rattle around or contact metal objects.

Troubleshooting a dim or dead laser

If the boresighter does not turn on or the dot looks weak, work through these checks in order. The supplied information does not include a repair procedure, so if these steps do not solve the problem, contact the seller or manufacturer for further guidance.

  • Check battery orientation: Confirm each cell is installed according to the polarity markings in the battery compartment. Reversing a cell can prevent the unit from powering on.
  • Try the spare set: Swap in the second set of batteries included with your TPO boresighter. If the laser brightens, the original cells were likely depleted.
  • Clean the contacts: Use a dry cloth or cotton swab to wipe away any visible debris on the battery contacts and the threads of the battery cap.
  • Inspect for corrosion: White or greenish residue on contacts indicates leakage. If corrosion is present, do not attempt to scrape it off with metal tools; contact support for advice.

What the supplied information does not cover

The product record for the TPO .350 Legend boresighter does not list a battery type, expected runtime, or a replacement schedule. It also does not include step-by-step instructions for removing or installing the battery cap. For those details, refer to the packaging or contact Texas Precision Optics Inc directly.

This article gives general care habits only. Always follow any safety instructions that come with your laser product, and never look directly into the laser aperture.

مقالات ذات صلة

Customer Service
الرئيسية
المنتجات
السلة
الملف الشخصي